How To Solve The Degumming Of PE Protective Film?
Aug. 05, 2019
Find here details of Black Conductive Film.
Black Conductive PE Film
Regarding the PE protective film, the most common situation is the problem of degumming of the protective film. This problem is most manifested on the profile protective film. When the protective film is peeled off from the surface of the profile after the profile is installed, the adhesive on the protective film is adhered. The glue did not tear off together with the protective film, but remained on the profile product. So how do we solve this problem? Black Conductive PE Film Factory would like to share with you.
The last thing customers want to see is that there is residual glue left on the product after the protective film is torn. This is very troublesome. It requires someone to scrape the glue off the profile. It is especially time-consuming and labor-intensive. The possibility is that the pressure glue used by the manufacturer in the production of the PE protective film does not conform to the regulations, that is, it is too sticky, so that when the protective film is peeled off, the external tension is greater than the internal stress and remains on the profile. If this problem occurs, you can use a clean cloth to pick up a little alcohol, and wipe the residual sensitive glue repeatedly until the sensitive glue is wiped clean, but you should be careful not to use too much force when performing the wiping test. Otherwise, it may affect the finish of the profile products. Of course, the most important thing is to choose the PE protective film manufacturer!
If you want to learn more information about Black Conductive PE Film, feel free to contact us.